[AIDE] Tablette LOGICOM E1052GP (MY1306P)

Alors voilà ce que j'ai, après avoir coché le débogage USB comme tu m'as indiqué:

pc3:android cageli$ ./adb devices
-bash: ./adb: No such file or directory

... Ben dis donc, faudra être patient avec moi  Ca y est j'y suis, je n'avais pas bien entré la première commande. Voilà ce que j'ai:

pc3:sdk cageli$ ./adb devices
List of devices attached
0123456789ABCDEF device

donc adb est bien installé et il reconnait ton appareil

et si tu tapes ensuite la commande
"su"

Je te mets tout ce qui est apparu:

pc3:sdk cageli$ ./adb su
Android Debug Bridge version 1.0.31

-a - directs adb to listen on all interfaces for a connection
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s - directs command to the device or emulator with the given
serial number or qualifier. Overrides ANDROID_SERIAL
environment variable.
-p - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
-H - Name of adb server host (default: localhost)
-P - Port of adb server (default: 5037)
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect [:] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [[:]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.

device commands:
adb push [-p]
- copy file/dir to device
('-p' to display the transfer progress)
adb pull [-p] [-a] []
- copy file/dir from device
('-p' to display the transfer progress)
('-a' means copy timestamp and mode)
adb sync [ ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell - run remote shell command
adb emu - run emulator console command
adb logcat [ ] - View device log
adb forward --list - list all forward socket connections.
the format is a list of lines with the following format:
" " " " "\n"
adb forward - forward socket connections
forward specs are one of:
tcp:
localabstract:
localreserved:
localfilesystem:
dev:
jdwp: (remote only)
adb forward --no-rebind
- same as 'adb forward ' but fails
if is already forwarded
adb forward --remove - remove a specific forward socket connection
adb forward --remove-all - remove all forward socket connections
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-d] [-s] [--algo --key --iv ]
- push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-d' means allow version code downgrade)
('-s' means install on SD card instead of internal storage)
('--algo', '--key', and '--iv' mean the file is encrypted already)
adb uninstall [-k] - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.

adb backup [-f ] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all] [-system|-nosystem] []
- write an archive of the device's data to .
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-obb|-noobb enable/disable backup of any installed apk expansion
(aka .obb) files associated with each application; the default
is noobb.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
( is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)

adb restore - restore device contents from the backup archive

adb help - show this help message
adb version - show version num

scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints:
adb get-devpath - prints:
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ ]
can be interpreted in several ways:

- If is not specified, both /system and /data partitions will be updated.

- If it is "system" or "data", only the corresponding partition
is updated.

environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
pc3:sdk cageli$


Bon courage!!! J'y comprends rien

Normalement
après avoir taper
su
L'invite (le caractère qui est avant le curseur, là ou tu entres une commande) devrait changer.

Quand vous n’êtes pas root, le $ s'affiche.
Quand vous êtes root, le # s'affiche.

C'est Adb shell et après su

oups pardon

Bonsoir,

Merci pour vos réponses. Donc bzhmobile, la tablette n'est pas rootée alors. Tu confirmes ou la commande n'était pas bonne ? Quelle est la commande que je dois taper alors ?
./adb shell su ou ./adb shell et ensuite ./adb su ?

EDIT: ... j'ai vraiment pas de bol! Je rentre du boulot. Un coup d'oeil sur forum-generaionmobiles.net. Je vois des réponses. Je retente de brancher la tablette et d'entrer les commandes avec Terminal et... rien. Ca me refait pareil et pourtant j'ai bien tout refait!!

Et ça tu avais essayé?

Titi66200 a écrit:

Pour savoir si elle est pre-rootée il faut taper

Code:

adb shell id

et ça doit donner uid=0(root)

Sinon tu tapes adb shell et à l'invite suivante tu tapes seulement su

Non, je vais essayer dès que Terminal pourra communiquer à nouveau avec la tablette. Merci