-all cpuquiet patches with 1.6ghz -s2w (old version-faster) you will get a tweaks fc..but it still works -smartmax gov -touchdemand gov -more settings interactive gov -deadline -row
et pour Alex-V -revert the multitouch fix....this will fix the incoming call bug..but will broke multitouch... to fix multitouch de-activate htc 3 finger system -special viper ramdisk (dont change it only if you must do it) -520 mhz max gpu -267 mhz min gpu -kernel is patched to 1300 mhz standard (you can go up to 1.6 ghz) you want notice a difference -standard is also tweaked interacive and deadline
Derniers changements
Changelog 2.7 Classic
-original nvidia autohotplug (like stock) -no oc -only a bit uv (mv values from 304 xmister version) [for more stable] -old and new s2w version (new with dt2w)
Changelog 2.6 Play Around V3
-fixed Viper UMS (Sorry forget to change one little number) = if you dont need this, you dont need to flash it..no other changes
Versions antérieures :
Changelog 2.6 RC
-mpdecision hotplug (after your tests..it seems the best..thx to all) -fixed light sensor (this fixes button backlight only go off on really sunny day..back to normal now) -wifi: allow reconnect if already connected -wifi: pre power up wifi =will fix sometimes not working wifi [if you still see its connected] i hope...my tests are good -interactive, smartmax, pmc from 2.4...it looks like these are the best atm -still 3 versions: old s2w, new s2w with dt2w and without s2w -updated git with latest changes
Changelog 2.6 Test 1 -fixed deep sleep problem (at least for me ) =new battery driver -2 Test Versions =cpuquiet =mpdecision ---please make your choise for future kernels (speed, battery and so on)
Changelog 2.5 RC 2
-fixed camera recording =to fix i had to add tegra 4 video driver again =this can broke mhl again ( i fix this if the sense 5 kernel source come out)
Changelog 2.5 RC -still based on my 1.6 Kernel Source -cpuquiet hotplug (instead of mpdec) [acts now more like 2.4] (but still working 4x Core on 100%+mhz) -smoother as test version -fixed wakeup lockscreen lag -auto-bln is back -2 versions old and new s2w (new with dt2w) -delete again the 25 mhz step -since 1.6 sources: (Read Changelog from 1.6 and below) =tegra 3 drivers (original drivers) (should be fix mhl) =internet pass through =drive droid support (needs testing, was working in 1.6 and did not change it) -if all is ok...next kernel will be not come before next week or so...so we can have a little break from flashing and just use our phone
Changelog 2.5 Test1 -based on my 1.6 Kernel Source fixed for Sense 5 ( for kernel devs..use board endovor /board endavor panel and board endavvor power from trips source and it will boot) -old s2w (Test version...new comes on RC) -no auto bln (like in 1.6..but next version have it again) -Rest like in the Changelog from 1.6
Changelog 2.4 RC
-CPUQUIET Hotplug (instead of mpdec.) -added pmc gov again -added gaming gov again -finetuned interactiv gov -fixed lockcreen lag (at least for me in compare to 2.3) -buttersmooth UI (at least for me in compare to 2.3)
Changelog 2.3 RC -fixed and back to original wifi (no disconnect on screen off) (= maybe delete the old connect files from trip on system/etc/firmware ) -changed some bt settings (must be tested) -2 versions old and new s2w (new s2w with dt2w)
Changelog 2.2 higher volt
-reduced oc for all to 1.6ghz (means variant free- want to have same things for all) -set higher cpu volt -finetune core volt -gpu 228-520 mhz
Changelog 2.2 RC -fixed slow downs (at least for me ) -fixed core voltage -changed gpu to 200-533 mhz (instead 247-520) [533 in performance / 3d scaling off in trickster} -fixed viper ums (very usefull if you are on ubuntu or such systems) -also the rest of the test kernels -2 versions: old and new s2w (new s2w with dt2w)
Changelog 2.2 Test Kernel 12 -changed to cpu govs from 1.6 kernel -reworked cpufreq a bit -interactive have no lag again -raised audio min to 204mhz 2 versions - Smartmax + Row - Interacive + deadline = let me know which one you want -people who still have speed problems...look into trickter if 3d gpu is off...if so switch it on..it can give stuck at normal cpu 475mhz lp mode (will look to this)
Changelog 2.2 Test Kernel 11
-MPDECISION is back -Smartmax as default -user voltage control -Lock the kernel to 4 cores if you set 620mhz as minimum (for gaming) =set back to 51mhz min to not lock at 4 Cores -Test Release so only old s2w -still trips wifi (but working on it)[/left]
V 2.1
-fixed all cores online -fixed max Cpu Freq on boot back to 1300mhz (will fix the to hot on Start-save boot) -original Nvidia Hotplug -removed TDF Framework/Hotplug -still based on trips ( so thx to him ) -OC -Auto_BLN (led backlight notification) -LED backlight brightness -(Viper)/UMS -(for other rom it must be tested) -original Fastcharge (must be enabled before) -Control how many cores online -old S2W -new S2W with DT2W -new govs =Smartmax =PMC =Touchdemand =Gaming -new I/O Sheduler =Row =Sio =Cfq -original vibration -maybe more -on my list:look to bt and wifi from original/mpdec/gpu interface/etc...etc
Téléchargement
2.7 RC Sense 5 Kernel 2.7 Classic Sense 5 Kernel Lien sur une Dropbox car des soucis avec sourceforge.net, il sera modifié dès que possible...
Spoiler :
2.6 RC Sense 5 Kernel 2.6 RC Sense 5 Kernel
2.5 RC2 Sense 5 Kernel 2.5 RC2 Sense 5 Kernel
2.5 RC Sense 5 Kernel 2.5 RC Sense 5 Kernel MD5: b2c9ee3d2027eff9c0f4a88ac27318c7
2.4 RC Sense 5 Kernel 2.4 RC Sense 5 Kernel
2.3 RC Sense 5 Kernel 2.3 RC Sense 5 Kernel
2.2 RC Sense 5 Kernel 2.2 RC Sense 5 Kernel
2.2
2.2 Test 12
2.2 Sense 5 Kernel Alex-V_SE_2.2_s2w.zip/
2.1 Sense 5 Kernel Alex-V_SE_2.1_s2w.zip/
2.0 Sense 5 Kernel Alex-V_SE_2.0_s2w.zip/
Autres infos
source sur XDA ...
Dernière édition par bzhmobile le Mar 8 Oct 2013 - 0:44, édité 13 fois
J'ai déjà essayé ce nouveau kernel sur la MagioRom 1.5. Ca va bien jusqu'à l'écran d'accueil, après le code pin... ensuite bootloops à n'en plus finir... j'ai remis le kernel d'origine en attendant un vrai kernel custom basé sur la base du vrai kernel d'origine... Ou la la ... c'est très phylosophique ce que je dit la...