Toute opération de flash n'est pas sans risque, lisez bien les différents tutos/guides et n'hésitez pas à poser des questions si vous avez des incertitudes. En aucun cas, le forum ou un de ces membres ne pourront être tenus responsables en cas de détérioration de l'appareil lié à l'une de ces opérations.
Description
Le mot du créateur de la rom "Pekaka" :
"Je vous présente Pekaka-Kernel. Ce Kernel est compatible uniquement avec le Note 3 SM-N900."
Détails :
- source form samsang stock source:SM-N900_JB_Opensource_Update2 - cross compiler:Linaro gcc 4.7 toolchain - init.d support - smart window(for cover of your phone) - Selinux Permissive(so Tai restore date is ok)
1) Faîtes un NANDROID Backup via le Recovery en allant dans "Backup et Restore/Backup" ou "Backup et Restore/Backup to External SD". 2) Faites un "Wipe Cache Partition" et dans "Advanced" "Wipe Dalvik Cache". 3) Flashez le Kernel. 4) Redémarrez et amusez-vous
Changelog
19 janvier 2014 - v7.2 :
- cluster version - delete 5420_cover_id(so S-view windows always take effective even use common cover) - LZMA instead of GZIP
Anciennes versions :
Spoiler :
15 janvier 2014 - v7.1 :
- cluster version - new config - delete PM_TEST - add 5420_cover_id - add GPIO_DVS - changed GZIP to LZMA - add b.L_operator - so,b.L cluster may always "big" like stock kernel
13 janvier 2014 - v7.0 :
- new building - new ondemand by me - new interactiveX(default) by me - all done is to keep ca15 not sleep into ca7,and make the kernel stable,more powerful,no reboot anytime. - upload my kernel source to share.
02 janvier 2014 - v6.0 :
- update N900-Exynos-core-pekaka-6.0 version - update N900-Exynos-cluster-pekaka-6.0 version - changed init.rc - added battery-manager and fixed some bad codes(so don't reboot while you are copying files from computer to your phone) - more...don't remember,from 5.0.2~5.0.9 tested by myself,so 6.0 is stable
27 décembre 2013 - v5.0 :
N900-Exynos-core-pekaka-5.0 version :
- all freqs:255Mhz~2.0G(1.9G default) - ca15:800Mhz~2.0G - ca7:225~750Mhz(why not 650?stable while screen off,so solved problem of reboot while connecting computer) --my core views:screen off:all switch into ca7,screen on:switch back to ca15 step by step according to your phone usage loads,so keep smooth and high performance - gpu:100 177 266 350 420 480 533 600(locked at 533,so 600 nearly not use,why?stable+temp+performace)
N900-Exynos-cluster-pekaka-5.0 version :
- all freqs:255Mhz~2.0G(1.9G default) - ca15:800Mhz~2.0G - ca7:225~750Mhz(why not 650?stable while screen off,so solved problem of reboot while connecting computer) - use my cluster code,screen on:switch into ca15,not like 4.0.2 and older versions never back ca15 while screen on wake up,so if you want the feathure of keeping all ca7 for powersave,don't use this version,just use cluster-4.0.2 version --my cluster views:screen off:all switch into ca7,screen on:switch back to ca15 step by step according to your phone usage loads,so keep smooth and high performance - gpu:100 177 266 350 420 480 533 600(locked at 533,so 600 nearly not use,why?stable+temp+performace)
22 décembre 2013 - v4.0 :
- update iks-core-2.1G mail 600M version v4.0 - add uv control - overclock 2.1G.T628 mail step max 600M,and locked at 600M - uv default as stock kernel - if you work at 1.9G,all default is ok - if you work at 2.0G or 2.1G,you should increase uv of these freq by 25mv or more,otherwise phone will be unstable
20 décembre 2013 - v3.0 :
- update ikcs-cluster version v4.0 - add uv control - 2.1G max freq,but 1.9G set default - I raise about 50mv for each freq due to overclock 2.1G - so if you only working at 1.9G,you can undervoltage more than 100mv for powrsaving,but decide on your working - if you want 2.1G,you can try to raise more mv for performance and stablity,but decide on your working - T628 mail step add 600M(the code is already on source code,so it is stable and perfectly working) - governor-consertive change min sampling rate 500000 - add governor-ondemand-sec - add SAMSUNG_BW_MONITOR
19 décembre 2013 - v3.0 :
- update 1.9G-Normal600M-_iks_core-v3.0.01 version - T628 mail step add 600M(the code is already on source code,so it is stable and perfectly working) - governor-consertive change min sampling rate 500000 - add governor-ondemand-sec - add SAMSUNG_BW_MONITOR
14 décembre 2013 - v3.0 :
- 1.9 Normal v3.0 update
two versions :
- iks-coremore powerful and stable on my testing),pls redownload v3.0-1(former one lack of DVF governor)
ikcs-cluster :
- both add governor DVF-PM_QOS - my compiler fixed some bugs,so recompile kernel without any mistakes!! - only 2.1G Overclock version for test(only me,not enough) - update to 3.0 - add Row,test I/O,set ROW default - T628 Mail step changed to :100 177 266 350 420 480 800
10 décembre 2013 - v2.0 :
T6248 Mail speed up to 800M,so change the Mail step from: 100 160 266 350 420 480 533 to 100 160 266 350 420 480 533 677 800
if you want to check,go to:\sys\devices\platform\mali.0\asv,clock,dvfs_tab le,time_in_state
fixed some wrong freqs table powersave version download more uv,Mail fixed mostly 500Mhz,rarelly use 677 or 800Mhz. normal version,Mail up to 800M,ofen use 677 or 800Mhz overclock keep on building for stable version alse keep on leaning how to add uv controller,but no plan presently
01 décembre 2013 - v1.5 :
-Initial Release
- source form samsang stock source:SM-N900_JB_Opensource_Update2 - cross compiler:Linaro gcc 4.7 toolchain - init.d support - smart window(for cover of your phone) - Selinux Permissive(so Tai restore date is ok)
![[KERNEL 4.3][SM-N900] Pekaka-Kernel v7.2 [19.01.2014] Empty](https://2img.net/i/empty.gif)
